|
|
Post by jps4jeep on Oct 12, 2006 19:56:02 GMT -3
Post up some things you have fabricated! Here is one I recently finished Check it out, first one I made, and hopefully will be the last. Made it from scrap at work. It is on the rear axle so it doesn't need to be super strong, just strong.    and just a preview shot  |
|
|
|
Post by axle on Oct 12, 2006 20:07:11 GMT -3
Nice job. are the lower steering arms getting cut off?
Bob
|
|
|
|
Post by cj7fan on Oct 12, 2006 22:36:46 GMT -3
Nice lookin' axle John and I like the dif guard too. Sooooo what do we have to do to get some more pics...??  Kent As for my ghetto fab... here is the stock tire stop that I welded in a plate so I could mount my CB antenna.   |
|
|
|
Post by bluerocket on Oct 12, 2006 22:56:44 GMT -3
Nice job. are the lower steering arms getting cut off? Bob At neuroc a lot of people were bolting through a sleeve to the lower ones for extra strength. Not sure if john's line up though. |
|
|
|
Post by jps4jeep on Oct 12, 2006 23:02:36 GMT -3
no they don't I thought about it, but since I am using wheels I already had (bought them in 1995), and due to the off set, the hi stear arms are really close to the rim. I also had to grind down some of the calipers to get them to clear a 15" rim with 3.5" backspacing
|
|
|
|
Post by bluerocket on Oct 12, 2006 23:06:00 GMT -3
Looks good, now ya just need to bolt them on  |
|
|
|
Post by PatriotYJ on Oct 12, 2006 23:19:19 GMT -3
i have some pictures of my one wheel only ebrake to pass inspection setup but they're on other computer, i'll post them later. .......its pretty ghetto
this ought become a pretty interesting thread
|
|
|
|
Post by mmagnumpi9 on Oct 12, 2006 23:25:19 GMT -3
Here is some ganster fab for ya!  |
|
|
|
Post by trav on Oct 12, 2006 23:52:03 GMT -3
what the hell is that?  it looks cool whatever it is |
|
|
|
Post by jeepgod on Oct 12, 2006 23:54:19 GMT -3
flat fenders
|
|
|
|
Post by trav on Oct 13, 2006 0:00:57 GMT -3
ohhhhhhhh i see it now. thanks
|
|
|
|
Post by jps4jeep on Oct 13, 2006 13:30:50 GMT -3
Looks good, now ya just need to bolt them on I wish, still waiting on parts, I had to order rear shafts, waiting on those, waitin go the steering to come back. I am running larger u joints so once the axle are in, I need to get the shafts cut and new yokes put on, and still working on the brakes. lots of little things to do, I made a couple brackets for the fron brakes this morning. |
|
|
|
Post by chrometj on Oct 13, 2006 13:33:03 GMT -3
looks good john, you are going sping over yes?
|
|
|
|
Post by ayoung on Oct 13, 2006 18:18:51 GMT -3
my new floors i just welded in are very ghetto fab...and thats the way i like it
|
|
|
|
Post by PatriotYJ on Oct 13, 2006 20:48:17 GMT -3
heres my easy way to reset my pinion angle after broken welds on both spring perches. worked great just jacked up on the pumpkin while the chain held the pinion down and i welded the perches and bingo another couple months worth of weld holding on wet 30 year old rod........  |
|
