|
|
Post by JeepFan555 on Nov 23, 2006 22:50:14 GMT -3
Ok so I am looking into doing a belly up on my YJ. I have a 1in BL and 4in procomp lift right now and I'm running 33". From looking around it looks like I would need a 1in MM lift and SYE and new driveshart. What skid, MM lift and SYE/Driveshaft should I get? Where can I get them and do I need anything else?
Also I want to get a front locker, something cheap but good. I have the stock dana 30 4.10 gears in it. Where and what one should I get?
Thanks guys
|
|
|
|
Post by rockdaleTJ on Nov 24, 2006 0:34:17 GMT -3
JKS MM lift, Tom Woods shaft, and some steel plate.
Lock-rite/Aussie Locker for the front?
|
|
|
|
Post by ayoung on Nov 24, 2006 1:05:37 GMT -3
lockright from porc
|
|
|
|
Post by SPYDER on Nov 24, 2006 2:18:41 GMT -3
M.O.R.E. bombproof mml
|
|
|
|
Post by chrometj on Nov 24, 2006 2:50:11 GMT -3
33 engineering skid if you dont end up making one yourself.
get the porc sye, toms woods driveshaft.
and a lockrite for the front. you have posi lock too in the front right mike? no more vaccum sh*t?
|
|
|
|
Post by JeepFan555 on Nov 24, 2006 13:09:39 GMT -3
no I still have the vac crap. I talked to dsgray and I think I can get a brand new lock rite cheap from someone he knows. Then I just need all that crap. Thanks guys I'm going searching on the internet now.
|
|
|
|
Post by JeepFan555 on Nov 24, 2006 13:26:39 GMT -3
porc sye is really cheap, very nice. How do I measure for a new driveshaft? Do I have to have the new skid on before I measure?
|
|
|
|
Post by dsgray16 on Nov 24, 2006 14:38:34 GMT -3
porc sye is really cheap, very nice. How do I measure for a new driveshaft? Do I have to have the new skid on before I measure? You measure yoke to yoke...etchnicaly you should wait till you get your SYE and belly up skid installed to get an accurate measument, but you could get it pretty close, and the driveshaft will have about 4-6 inches of travel anyways |
|
|
|
Post by chrometj on Nov 24, 2006 16:58:45 GMT -3
install that posi lock! or replace those shafts with TJ ones! you dont want to deal with your front axle not working, like in the middle of snowstorms in RI...like last year lol
|
|
|
|
Post by JeepFan555 on Nov 24, 2006 19:03:04 GMT -3
it works great now, I got a vac off my old jeep and installed it and it works great now. Dan you will have to measure it for me.
|
|
|
|
Post by chrometj on Nov 25, 2006 4:31:22 GMT -3
wich belly up are you doing mike
|
|
|
|
Post by jps4jeep on Nov 25, 2006 22:21:36 GMT -3
I checked out that 33 engineering one, heard of it, but never really looked into it, seams like a well designed product.
|
|
|
|
Post by JeepFan555 on Nov 26, 2006 6:48:22 GMT -3
not sure which skid yet, the 33 engineering one looks really nice. I like the idea of it being two pieces.
|
|
|
|
Post by SPYDER on Nov 26, 2006 13:15:27 GMT -3
one of my friends has the 33 engineering skid on his TJ and loves it. I haven't seen it, but he says its holding up well to the abuse.
fyi...when you do it, make sure to reinstall the 4wd bracket to the body or get an aftermarket one.....my buddy didn't cause it didn't fit right originally and ended up breaking the gear selector in his t-case.
|
|
|
|
Post by bluerocket on Nov 27, 2006 10:26:16 GMT -3
you do not want a locker with the 260 ujoint front axle shafts  |
|
