|
|
Post by njhcx4xlife on Dec 13, 2005 19:15:48 GMT -3
I have the rustys 2 inch spring kit and i also have 3/4" spacers with the stock isolator. I also have a t-case drop, rear trac bar bracket, adj front trac bar, and front sway bar extensions/discos. my question is if i take out the spacers i have and the stock isolator and replace them with a one piece 2 inch spacer i will be left with 3 1/4 inches of lift so di i need anything else? Would I need a drop pitman arm or anything else? as far as i can tell i already have everything a pre assembled kit of that height would come with. Basically I am curious what else i need to order with the new spacers....Vince
|
|
|
|
Post by 97Sahara on Dec 13, 2005 19:43:51 GMT -3
you definetly wouldnt need a dropped pitman arm, you should be fine with everything else
|
|
|
|
Post by chrometj on Dec 13, 2005 19:54:26 GMT -3
will stock control arms suffice?
|
|
|
|
Post by JeepFan555 on Dec 13, 2005 19:56:40 GMT -3
put a 1" body lift on while your at it and then get some 34"
|
|
|
|
Post by njhcx4xlife on Dec 13, 2005 20:56:25 GMT -3
Mikey chrome - I was wondering the same thing but don't have the answer
and to you mr smith, you probably posted that while i was in my room which is 6 feet from yours...you are so cool you post wh***, hahahahahahahahahhahahaha
|
|
|
|
Post by chrometj on Dec 13, 2005 21:09:07 GMT -3
|
|
|
|
Post by 97Sahara on Dec 13, 2005 21:23:21 GMT -3
|
|
|
|
Post by njhcx4xlife on Dec 13, 2005 21:33:55 GMT -3
I don't know what is funnier, that picture or how big of a tool smith is
|
|
|
|
Post by JeepFan555 on Dec 14, 2005 0:07:11 GMT -3
i hate you guys! its cool though, its just leaf spring envy
|
|
|
|
Post by chrometj on Dec 14, 2005 0:10:32 GMT -3
i hate you guys! its cool though, its just leaf spring envy  |
|
|
|
Post by bluerocket on Dec 14, 2005 0:32:04 GMT -3
You should be good with what you've got. I dont know that I would take the isolater out though, It will give it a harsher ride.
|
|
|
|
Post by chrometj on Dec 14, 2005 3:29:07 GMT -3
x2, just add another 3/4 spacer, or include the spacer as well, it will be crazy tall but youll like it and prolly put on 33s soon enough lol
|
|
|
|
Post by makizoo on Dec 14, 2005 11:37:14 GMT -3
You should be ok. With the stock control arms, your wheelbase will be a bit shorter, but should be ok. Get the adjustable uppers and lowers, and rear d-shaft as the next step and ditch the t-case drop.
|
|
