death wobble again, help

[messton]

sad to say three trails in two weeks and no money is no good.

i got death wobble again today, i fixed all the hardware it the front and noticed my front trac bar bushing on the left side is shot and the bolt was working its way off.so i tighent it up and walla its gone.ive come to the conclution that autozone sucks so does my lift and i wont mention any names gary at garys jeeps, so i need a new lift anyone know of a good trail and highway kit, also what can i keep off the lift i got.

ill run what i got for now and just fix it but i want to see what peps like on and off road is it bouncy, stiff what ever. this lift is very stiff and rough of a ride maybe thats why they call it a rough country [pos].

ya, nothing against gary hes a nice guy if you are buying somthing off him lol,no really he coolbeans but my sister can weld better than his a** he sucks, every weld he put in is breaking on the lift kit [hes the installer of the lift and sold me the jeep] so i just want to take the lift out and start over.

[dsgray16]

Thats why installing your own lift is gooood, having someone else instal it is badddd

Rough Country sucks, this is a well established fact

Why did you have to have welding done to put a 4 inch lift in??

[messton]

the brackets that hold the tracbars are breaking so they need to be welded understand. if sitting in the cab the front right bracket and the rear left are the ones breaking, i fixed the front, now i need the brushings for the front trac that i ordered today at bluemagic kit cost 8.98 so well see if that cures the front more.the rear i need to tighten just havent gone by the garage to use the impact gun. should since if it goes i go in the woods or around another telephone pole.

[jps4jeep]

Huh?

[messton]

is anyone running 35s tires on 15" rims if so can i have there # from the ground to the bottom of door to check what size lift i got im not a 100% sure if its a 6 or a 4, im looking under the jeep and the body mounts dont look like 2"s. is there any way to see what size lift someone has while the kit is on the jeep and has 10000 miles on it? [ i got a 99 tj]

im not sure why every one is puzzled on why i had to weld the kit in, if i had a 6" lift woulld it be any different to install.

on this kit the front right side is where the braket goes [over the orig] and it brings the front trac bar up, same on rear left. understand or no.

[jeepgod]

yea the track arm brackets have extensions on them.
i would think you have a 4" lift

[chrometj]

this is with stock track bars? why cant you switch to adjustible and ditch those brackets?

[messton]

show me some where to start about curing this wit adjustables i dont know how they work.