|
|
Post by Bono426 on Aug 19, 2006 21:40:19 GMT -3
a couple days ago my jeep started to not start on the first crank. its taking me like four attempts to get it firing. any one know what this is? is it some simple thing or is it complicated?
thanks for your help
charlie
also, it only does this when the jeep is cold.
|
|
|
|
Post by jeeptech on Aug 19, 2006 21:55:10 GMT -3
Try the next time your jeep is cold, cycle the key to the run position 3 times before starting the engine. This will prime the fuel system and the engine should start on the first attempt. If this works, then you need to figure out why the fuel system is not priming on the first attempt.
|
|
|
|
Post by Bono426 on Aug 19, 2006 23:25:58 GMT -3
didnt work. anything else?
|
|
|
|
Post by jps4jeep on Aug 20, 2006 17:52:30 GMT -3
When was the last tune up?
|
|
|
|
Post by Bono426 on Aug 20, 2006 22:00:56 GMT -3
tune up was a while ago.
|
|
|
|
Post by chrometj on Aug 21, 2006 13:01:01 GMT -3
thar yo go
|
|
|
|
Post by bduece on Aug 24, 2006 21:31:07 GMT -3
|
|
|
|
Post by Bono426 on Aug 25, 2006 21:48:53 GMT -3
ill give it a shot, thanks for the link, o and jeeptech, you are right, if i leav it primed for like 10 seconds then try to start it it helps
|
|
