|
|
Post by Tooch on Sept 18, 2006 13:30:01 GMT -3
Ok, so I bought a Tom Woods drive shaft, but where do I get the connector to mount it up to my T-case? For those of you who don't know, I have a rubicon, so I already have a SYE, but I need an adapter to mount to the t-case where I can mount a u-joint on the other side.
Thanks.
|
|
|
|
Post by makizoo on Sept 18, 2006 14:12:33 GMT -3
You need to remove the harmonic balancer from the output shaft and replace with a yoke end. You can get one from Elias 4wd for < $50.
|
|
|
|
Post by Tooch on Sept 18, 2006 14:18:29 GMT -3
I got....bla bla bla....
You have to show me a picture if possible or give me a link. I just looked through the website and couldn't find them.
I'm officially and idiot!
|
|
|
|
Post by Twisty on Sept 18, 2006 15:46:05 GMT -3
Tooch, you could call Lou. I live 8 mins from Elias, so if you need me to do anything let me know.
Give Lou a call. his site is kida confusing.
|
|
|
|
Post by bluerocket on Sept 18, 2006 17:08:41 GMT -3
Ok, so I bought a Tom Woods drive shaft, but where do I get the connector to mount it up to my T-case? For those of you who don't know, I have a rubicon, so I already have a SYE, but I need an adapter to mount to the t-case where I can mount a u-joint on the other side. Thanks. How can you eliminate something you never had?  |
|
|
|
Post by Tooch on Sept 18, 2006 17:12:20 GMT -3
Ok, so I bought a Tom Woods drive shaft, but where do I get the connector to mount it up to my T-case? For those of you who don't know, I have a rubicon, so I already have a SYE, but I need an adapter to mount to the t-case where I can mount a u-joint on the other side. Thanks. How can you eliminate something you never had? I don't know.....all I know is that I was told the rubicon comes stock with a SYE. I have no idea what it is or what it does. All I know is that I need something to allow me to hook-up my tom woods. Jeffrey - confused. |
|
|
|
Post by chrometj on Sept 18, 2006 17:26:17 GMT -3
|
|
|
|
Post by Tooch on Sept 18, 2006 17:30:03 GMT -3
Ok, those are the things I've found, but how do they mount to the T-case? I have a circular plate with 4 bolts? |
|
|
|
Post by Tooch on Sept 18, 2006 17:30:33 GMT -3
Is that my harmonic balancer?
|
|
|
|
Post by bluerocket on Sept 18, 2006 17:44:11 GMT -3
My guess is you should listen to maki since he's the only one of us with a lifted rubi. But I am a dumbass so do as you wish.
|
|
|
|
Post by jeepgod on Sept 18, 2006 17:46:44 GMT -3
this should be in tech
|
|
|
|
Post by Tooch on Sept 18, 2006 18:00:23 GMT -3
I was actually asking where to buy it and it turned into a tech question.
But keeping with that trend..
People are told to get a slip yoke eliminator when they lift the jeep, but now I have to get a yoke? Isn't that contradictory?
|
|
|
|
Post by Twisty on Sept 18, 2006 18:18:44 GMT -3
tooch, invest in a SYE eliminator kit. then you dont need to worry about any more parts!
|
|
|
|
Post by ayoung on Sept 18, 2006 18:24:43 GMT -3
tooch, i dont know any thing about rubis, but it sounds like you have the flat plate from like what a hnt is, you need to put that yoke on your output shaft and use a big a** nut to hold it on...maki please help this confused individual
|
|
|
|
Post by bluerocket on Sept 18, 2006 18:39:46 GMT -3
Does anyone understand what a slip yoke is? and what a slip yoke eliminator is? And what a yoke is?
Arrrrrrrrrrrrrrrrrrrrrrrrrr i'm going insane.
|
|
