|
|
Post by pianoguy on Dec 14, 2006 11:59:56 GMT -3
You all know that I installed a 1" body lift. Do I need to get a longer steering shaft. It just seems like not enough shaft is going over the the part on the gear box. I am thinking that this is just going to pop off when wheeling.
|
|
|
|
Post by J.T.Woody on Dec 14, 2006 12:40:07 GMT -3
There should be a bolt/collar somewhere on the steering shaft. If you loosen it, you should be able to slide the shaft down further. May need to hit everything with a rust penetrant first.
FWIW, I did not have any issues when I did the 1"BL on my '89 YJ.
|
|
|
|
Post by jps4jeep on Dec 14, 2006 18:55:17 GMT -3
me neither, didn't touch the steering shaft, but I also have an after market shaft no sure if that makes any difference.
|
|
|
|
Post by mikeswrangler on Dec 14, 2006 19:56:45 GMT -3
Your shaft is fine for a 1" body lift. You will have no problems with normal driving or wheeling. Plus isnt a yj shaft a slip style 2 piece shaft or am I thinking of my pathfinder.
|
|
