|
|
Post by PatriotYJ on Apr 28, 2006 13:26:20 GMT -3
anyone know if the dana 30 and 35 carriers with stock 3.07s will work with 4.10s?
|
|
|
|
Post by chrometj on Apr 28, 2006 13:36:17 GMT -3
no, i believe the ones in the 3.07s are for 3.54 and up(numerically lower) ex 3.07, so youd have to go 3.54 and lower (ie 4.10:1)
you need a whole different carrier
|
|
|
|
Post by jps4jeep on Apr 29, 2006 0:59:56 GMT -3
Wait a tick, I just checked and the 4 cyl and the 6 cyl YJ's have the same part number for a carrier. and a 4 cyl has 4.10's and 6 cyl have 3.07-3.54's so might work, but I will look into this further.
|
|
|
|
Post by bluerocket on May 2, 2006 0:09:02 GMT -3
I just ordered carriers, the D30 spicer carrier is 3.73 and numericly higher (aka wont work)
D44 is 3.92 and numericly higher. Not sure about a 35 beacuse I would never gear it.
|
|
|
|
Post by PatriotYJ on May 2, 2006 12:49:52 GMT -3
ok well i'm switching back to open diff in the front anyone got a carrier for the 30 that they want to donate or trade for a welded one? i can get one that originally had 3.07 but i have to pay shipping...(dont want to)
|
|
|
|
Post by chrometj on May 2, 2006 15:04:18 GMT -3
what happened with the new axles?
|
|
