|
|
Post by jeepfreak on Apr 24, 2005 20:31:16 GMT -3
looking for some advice. here goes, my buddy blew is dana 30 to pieces in his 90 wrangler, I happen to have a spare complete form my 92 project. we swapped it out today with not too many problems except the vacum motor plug is different from one jeep to the other. would it be easier to swap vacum motors or swap the vacum harness? looking for some direction. thanks
|
|
|
|
Post by mikeswrangler on Apr 24, 2005 21:27:45 GMT -3
just swap the vacuum motors. You only need a tube of ista gasket for a sealnt. Or if you want you can switch over the harness but going from the 3 vacuum to the 2 vacuum harness, I think you will loose the vacuum line that the switch turns the 4x4 dash light on. I think thats what that third line does, the 91-95 style has the electronic switch.??
|
|
|
|
Post by jps4jeep on Apr 26, 2005 9:20:27 GMT -3
Correct, or do your self a huge favor and get rid of the system all together! and make is cable acuated!
|
|
